IPX3–IPX6 Waterproof Test Chamber | Precise Rain & Water Jet Testing for Electronics & Automotive

水進入試験装置
December 08, 2025
Category Connection: 水進入試験装置
Brief: Here’s a fast, informative look at what this solution does and how it behaves. Watch as we demonstrate the IPX3–IPX6 Automotive Component Jet Nozzle Water Spray Test System in action, showing how it simulates rain and powerful water jets to verify waterproof ratings for electronics and automotive parts according to IEC 60529 standards.
Related Product Features:
  • Simulates IPX3, IPX4, IPX5, and IPX6 waterproof test conditions using oscillating tubes and jet nozzles as per IEC 60529.
  • Features a robust painted steel outer casing and SUS304 stainless-steel inner chamber for excellent corrosion resistance and durability.
  • Includes a rotating turntable with adjustable speed (1-5 r/min) and load capacity up to 20kg for uniform testing.
  • Equipped with a large transparent observation window and built-in LED lighting for real-time monitoring of tests.
  • Offers manual flow adjustment via a flow meter and a built-in 90L water tank for recyclable water supply.
  • Supplies a stable water system with controlled spray angles and adjustable flow rates for repeatable results.
  • Designed for testing products up to 1000mm in length/width and 100mm in height, ideal for automotive components and electronics.
  • Comes with a waterproof socket inside the chamber to power samples during testing for comprehensive evaluation.
FAQ:
  • What standards does the IPX3–IPX6 Waterproof Test Chamber comply with?
    The system conforms to IEC60529:1989 +A1:1999 +A2:2013, specifically for IPX3, IPX4, IPX5, and IPX6 tests as outlined in figures 4 and 6 of the standard.
  • What are the key applications for this test chamber?
    It is widely used for waterproof testing of outdoor lighting, household appliances, automotive components, electrical cabinets, and other electronic products, aiding in design validation, quality inspection, and certification.
  • How is the water spray controlled during IPX3 and IPX4 tests?
    For IPX3 and IPX4, oscillating tubes with specific swing angles (e.g., ±60° for IPX3) and needle holes of φ0.4mm are used, with adjustable flow rates and spray pressures between 80-150Kpa.
  • What are the installation requirements for this equipment?
    It requires a level, waterproof floor with good drainage, ventilation, and no strong vibrations or electromagnetic fields. Power supply must be AC400V, 50Hz, three-phase, with a dedicated leakage protection air switch, and water supply with pressure ≥0.2Mpa and a 4-point faucet within 2 meters.